ENVIRO/Bright SC-2

Product Code

0005245

Product Description

ENVIRO/Bright SC-2 is a concentrated, acidic cleaner used to clean and deoxidize unfused tin-lead surfaces prior to hot oil fusing. ENVIRO/Bright SC-2 is designed to remove metallic oxides, light oils and organic contaminants, while at the same time neutralizing alkaline etch residues. Unlike conventional solder conditioners, ENVIRO/Bright SC-2 can withstand significant copper contamination prior to losing its effectiveness. The product is suitable for either spray or immersion applications and is ideally suited for feed and bleed applications.

Performance Features

ENVIRO/Bright SC-2 is specifically formulated to remove fingerprints, light oils, alkaline etch residue and metallic oxides from unfused tin-lead surfaces.
ENVIRO/Bright SC-2 offers a wide process latitude and is ideally suited for feed and bleed operation.
ENVIRO/Bright SC-2 is a concentrate employed at 10 – 40% by volume and can be replenished on a feed/bleed basis.
ENVIRO/Bright SC-2 tolerates copper concentrations exceeding 800 mg/l improving performance and minimizing dump frequency.

Technical Data Sheet (TDS)

Product Categories

Printed Circuit Board

Strip Etch Strip (Outer Layer)

Solder Conditioner

CONTACT US

More Products

ANTI/Foam CR-D

ANTI/Foam CR-D is a non-silicon foam control agent formulated to inhibit foaming associated with photopolymer developing and stripping.

PRO/Strip 2101-B

PRO/Strip 2101-B is the second step of a twostep, nitric acid based tin and tin-lead stripping solution designed specifically for dual tank dip applications.

Film Cleaner 101

Film Cleaner 101 removes oil, grease, dust, and fingerprints from all types of film including Diazo Emulsion Imaging films. Film Cleaner 101 is formulated with an anti-static agent for removing static from nonconductive films.