How to Extend Your Concrete Pouring Season into the Colder Months

Water scale buildup in direct-contact water heaters, heat exchangers, and transfer lines can reduce heating efficiency, increase fuel costs, and shorten the concrete pouring season for ready-mix operations. Seacole’s concentrated 864A water hardness handler and scale control agent helps prevent scale and fouling, reduce maintenance needs, and keep equipment operating efficiently through colder weather.

Direct-contact water heaters have revolutionized the concrete industry. Your concrete pouring season is no longer at the mercy of Old Man Winter. With a water heater, you can pour later into the winter and earlier in the spring, adding dozens of projects to your production schedule.

But there’s one problem with direct-contact water heaters: they are notorious for scale buildup in areas with hard water.

When water heaters are brand new, they are very efficient and have minimal operation costs. But as they age, scale builds up in the heaters, heat exchangers, and transfer lines. Your heater must work harder to operate, which means you lose efficiency and spend more money to run the heater. You also spend more in labor to periodically descale your equipment by hand with hazardous chemicals.

Effects of Water Scale on Your Concrete Pouring Operation

If you’re experiencing inefficient heating or rising fuel costs at your concrete pouring operation, chances are your water heater has water scale issues. A water hardness level greater than 9 grains (153 ppm) of calcium carbonate per gallon will eventually cause water scaling in water heaters.

If you allow scale to build up in your tank, exchanger, or water lines, you’ll feel its effects in your operation’s efficiency and on its fuel bill. Your pouring season will get shorter and shorter the more scale builds up in your heater. And as your season gets shorter, your fuel costs will rise. In the offseason, you may even find you need to pay a crew to take your heater apart and clean it with hazardous chemicals.

Using 864a Scale Control In Your Water Heater Lines Can Extend Equipment Life
Using 864A Scale Control In Your Water Heater Lines Can Extend Equipment Life

864A: An Effective, Affordable Solution for Water Scale

By regularly metering in a scale inhibitor and anti-foulant into fresh water entering your heater, you can extend your production season and keep ahead of your competition. Scale inhibitors extend the life of your equipment and reduce the need for yearly deep cleaning. Clean equipment is more effective and efficient, saving you time and money.

Seacole’s most effective scale inhibitor and anti-foulant is 864A water hardness handler and scale control agent. Its liquid formula removes and prevents scaling and fouling without hazardous ingredients. In fact, 864A has a very low toxicity and does not contain zinc, chromates, or phosphates, making it safe for your employees and the environment and harmless to your concrete mix.

Because 864A is super concentrated, most Redi-Mix concrete operations need just one or two drums a year to keep their equipment working optimally. You can even conveniently dispense it directly from its shipping container into your water heater lines via a Pulsatron pump dispensing system.

Water scale issues often put concrete businesses out of commission when the weather gets cold. But regular descaling with a scale inhibitor can keep your equipment running efficiently and affordably well into the winter months. For more information on 864A, contact the industrial chemistry experts at Seacole today.


Extend Your Concrete Pouring Season FAQs

What causes scale buildup in direct-contact water heaters at concrete plants?

Scale forms when minerals, particularly calcium and magnesium associated with hard water, accumulate on equipment surfaces as water is heated. Over time, these deposits can restrict heat transfer and contribute to buildup in water heaters, heat exchangers, and transfer lines.

How does water scale affect direct-contact water heater efficiency?

Scale deposits interfere with heat transfer, forcing equipment to use more energy to heat water to the desired temperature. This can increase fuel costs, reduce heating performance, and lead to additional labor and maintenance expenses for manual descaling.

How does 864A help control water scale?

Seacole’s 864A is a concentrated liquid scale inhibitor and anti-foulant designed to help prevent scale and fouling in water-heating systems. Regular metered application to incoming water can help maintain equipment efficiency, reduce the need for manual descaling, and extend equipment service life.

How can concrete producers incorporate 864A into their water-heating systems?

864A can be metered directly into water heater lines using a dispensing system, such as a Pulsatron pump. Proper dosing and consistent treatment help maintain scale control while reducing the need for frequent equipment cleaning and associated downtime.

Share this post, choose your platform!

Subscribe to Our Newsletter

Get updates and learn from the best.

Seacole Logo Horiz Rgb 400px.png

Contact Us