POLY/Solv RS-740 (RS-740) is a highly concentrated solution designed to economically and efficiently strip most commercially available, fully aqueous dry film resists. RS-740’s unique formulation contains penetrating additives designed to reduce entrapment of dry film in areas exhibiting tin or tin/lead over-plate. Additionally, RS-740 does not include sodium, potassium, ammonium hydroxide, or alcohols (including methanol); reducing alkaline attack of copper, tin, and solder. As such, RS-740 is easier to waste treat and exhibits less odor than many competitive products.
RS-740 was formulated to produce stripped resist particles averaging 0.2-0.5 cm in diameter (with most dry films). RS-740 also incorporates a unique blend of inhibitor compounds to minimize corrosion of tin-lead and/or solder on hard boards and leave a bright, stable, oxide free copper surface suitable for AOI inspection.
Performance Features
- Exhibits minimal chemical and/or galvanic corrosion attack on solder simplifying waste treatment of spent solutions and resist particulate.
- The formulation of RS-740 does not contain sodium or potassium hydroxide.
- RS-740 is highly concentrated and is effective at concentrations as low as 4% in spray applications.
- Suitable for feed and bleed processing with Seacole’s automated resist stripper controller.
- Designed for spray applications but effective in immersion tanks as well.